Skip to main content

Full text of "PlayStation 2 Repair Manual"

See other formats


Disassembling PlayStation 2 Top Cover 



iiixit 



Disassembling PlayStation 2 Top Cover 



Tools used in this guide 

• Metal Spudqer (1) 

• Phillips #00 Screwdriver (1) 

• Phillips #1 Screwdriver (1) 



Prerequisite for the lens cleaning and laser replacement. 



© 2010 iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 3 



Disassembling PlayStation 2 Top Cover 




Step 1 - Top Cover 

• Flip the PlayStation 2 so that the bottom of the device is 
facing up. 

• Using a metal spudger, pry the 8 flat screw covers out. 

• Remove the following 8 screws: 

• Four 55.4 mm Philips screws. 

• Four 18 mm Phillips screws. 




Step 2 

• Peel the warranty sticker next to the main power switch 
from the case. 



©2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 2 of 3 



Disassembling PlayStation 2 Top Cover 




Step 3 

• Flip the PlayStation 2 back over and remove the top 
cover, prying the half closer to the power switch first 
and rocking the whole thing towards the front 

• Carefully remove the cord that attaches the 
two halves by unclipping the power cord 
assembly from the case in the lid. 



A 



To reassemble your device, follow these instructions in reverse order. 



This document was last generated on Dec 14, 2010. 



©2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 3 of 3